進口衛生級安全閥(德國奧萊斯OLES品牌)
【進口衛生級安全閥】詳細說明：
安全閥是啟閉件受外力作用下處于常閉狀態，當設備或管道內的介質壓力升高超過規定值時，通過向系統外排放介質來防止管道或設備內介質壓力超過規定數值。衛生級安全閥屬于自動閥類，衛生級安全閥主要用于鍋爐、壓力容器和管道上，控制壓力不超過規定值，對人身安全和設備運行起重要保護作用。
Safety valve is that the opening and closing parts are in normal closed state under the action of external force. When the medium pressure in the equipment or pipeline rises above the prescribed value, the medium pressure in the pipeline or equipment can be prevented from exceeding the prescribed value by discharging the medium outside the system. Hygienic safety valves belong to automatic valves. Hygienic safety valves are mainly used in boilers, pressure vessels and pipelines. The control pressure does not exceed the specified value, which plays an important role in protecting personal safety and equipment operation.
【進口衛生級安全閥】應用：
安全閥是衛生級不銹鋼閥門，它的安全設計使得它能保護設備，所以它安裝在排放壓力的回路，對管路、泵、裝置、儲罐等起安全保護作用。廣泛應用于食品、飲料、乳制品、制藥、啤酒等行業。
Safety valve is a sanitary stainless steel valve, its safety design enables it to protect equipment, so it is installed in the discharge pressure loop, which plays a safety protection role for pipelines, pumps, devices, storage tanks and so on. It is widely used in food, beverage, dairy products, pharmaceuticals, beer and other industries.
【進口衛生級安全閥】工作原理：
安全閥是通過調整彈簧的壓緊螺母來校準一個特定壓力。校準壓力是為了避免設備損壞而定的大安全壓力值。在正常的的工作壓力下，閥門是關閉的；當系統壓力超過校準壓力時，閥門打開。管道系統中的壓力得到釋放，從而達到對管路及設備的保護。
改進型，它增加了氣動開啟裝置，便于對安全閥及其管路進行CIP清洗。
安全閥是一種較為特殊的閥門，在出廠時都經過了嚴格的校驗，但為了使閥門能更切合實際運行工況，故有條件時，應盡可能現場對閥門再進行校驗。
【進口衛生級安全閥】技術選項：
規格從DN25-1"到DN65-3"
壓力操作范圍（改變彈簧）
焊接、卡箍、螺紋、法蘭連接（毫米或英寸）
工作壓力：10bar
工作溫度：-10℃到120℃（140℃用于短時期或消毒）
壓縮空氣壓力：5bar-7bar
供氣連接：R1/8"（BSP）
與物料接觸部分：1.4404/AISI 316L 1.4301/AISI 304
其他不銹鋼部分：1.4301/AISI 304
內表面接觸產品：Ra≤0.8μm 電拋光
