ASMJ0.4-30-3自愈式電容器、ASMJ0.4-40-3自愈式電容器

BSMJ、BCMJ、BZMJ、ASMJ系列自愈式低電壓并聯電容器

自愈式低電壓并聯電容器是采用*的金屬化膜作為材料，引進*進技術、設備，嚴格按照國家標準及IEC 標準生產的：主要用于低壓電網提高功率因數，減少無功損耗，改善電壓質量。
self-healing type low voltage shunt capacitor made of the advanced metallizde film,is produced strictly in accordance with the National Standard and IEC standard by the imtroduced for design techniques and equipments.The device is mainly suitable for low voltage electric network to improve power fact or,reduce reactive loss and better the voltage quality.

型號說明 model meanings

主要技術指標 main techniqueindessign
1. 環境溫度：-25℃ ~+50℃，濕度≤ 85%，海拔2000 米以下；
2. 額定電壓：120VAC，230VAC，400VAC，450VAC，525VAC，690VAC，750VAC，1050VAC；
3. 額定容量：1~80Kvar
4. 容量允差：-5~+10%
5. 損耗角正切值：在工頻額定電壓下，20℃時tanδ ≤ 0.1%；
6. 耐電壓：極間2.15 倍額定電壓5 秒鐘，極殼間3KVAC 可10 秒鐘；
7. 絕緣性: 極殼間500VDC,1 分鐘.R ≥ 1000MΩ；
8. zui高允許過電壓：1.10 倍額定電壓；
9. zui高允許過電流：1.30 倍額定電流；
10. 自放電特性：電容器斷電后3 分鐘，剩余電壓從 2 Un 降至75v 或更低；
11. 符合標準:GB/T12747.1-2004,IEC60831-1996。
1.Ambiebt temperature:-25℃ ~+50℃ .Humidity ≤ 85% ,Atitudenot higher than;
2.Rated voltage:120VAC,230VAC,400VAC,450VAC,525VAC,690VAC,
750VAC,1050VAC;
3.Rated capacitw:1~80KVar;
4.Capacitance tolerance:-5~+10% ;
5.Tangent of the loss angle:With the power frequency rated voltage 20℃ Hour tanδ ≤ 0.1% ;
6.Withstand voltage:Between terminals 2.15 times ratde voltage for 
5 secomdes，between terminal and contain and container 3KVac for 10 secomds;
7.Insulation level:Betwee terminals and container 500DC,l minute. R ≥ 1000MΩ;
8.Maximum allowable over-voltage: 1.10 times rated voltage;
9.Max permissible over-current:1.30 times rated current;
10.Self sustained discharge ability:Give Un DC voltage to capacitor, the residual voltage to 75v or lower within 3minutes after power off;
11.Applicable standard:GB/T12747.1-2004.IEC6083l-1996.

主要特點 main features
1. 體積小，重量輕
由于采用金屬化聚丙烯膜新材料作為介質，體積、重量僅為老產品的1/4 和1/5；
2. 損耗低
實際值低于0.1%，所以電容器自身的能耗低、發熱少、溫升低、工作壽命長、節能效果佳;
3. 優良的自愈性能
過電壓所造成介質局部擊穿能迅速自愈，恢復正常工作，使可靠性大為提高；
4. 安全性
內裝自放電電阻和保險裝置，使用安全可靠；
5. 不漏油
本產品采用微晶蠟作為浸漬劑，常溫呈固態，熔點高于70℃，在使用過程中不漏油，避免環境污染。
1.Compacted and light
Its volume and weight are only 1/4 and 1/5 of the old product because of the using of new dielectric-metallized polypropylene film.
2.Low loss
The real figure is lower than 0.1%,so the capacitor itselfis extremely low the heat it gives out is little and the rise oftemperature is low.So its service.life is very long and it can save energy at the same time.
3.Excel lent self-healing ability
Damage of part of the dielectric caused by over-voltage can be self-healed quickly and return to normal state.So the reliability is much higher.
4.Safety
In wardly equipped self-discharge rseistor and safly equioment.
5.Nooil leakage
The capacitor uses advanced.Semi-solid impregnant whose drip melting point is above 70℃ ,There will be no loss of oil during the course of using it.And thus the surrounding is out from being polluted.The capacitor itself doesn’t have to run the risk of invalidation caused by oil leakage.

主要技術數據 man technical characterisetics

• 注：如需特殊規格型號產品根據用戶要求供貨 

   

  

  單相分相電容器列表
  序號	電壓等級	產品型號規格	額定容量	額定頻率	額定電容	額定電流	外形尺寸	圖形
  1	250V	BSMJ0.25-5-1	5		255	20.00	167*57*125	圖5
  2		BSMJ0.25-7.5-1	7.5		382	30.00	167*57*180
  3		BSMJ0.25-10-1	10		510	40.00	167*57*210
  4		BSMJ0.25-15-1	15	50Hz	764	60.00	180*70*220	圖6
  5		BSMJ0.25-20-1	20		1019	80.00	180*70*270
  6		BSMJ0.25-25-1	25		1274	100.00	180*70*270
  7		BSMJ0.25-30-1	30		1529	120.00	180*95*270	圖7

  注：如需特殊規格型號產品根據用戶要求供貨 

   

  一體型單相分相電容器列表
  序號	電壓等級	產品型號規格	額定容量	額定頻率	額定電容	額定電流	外形尺寸	圖形
  1	250V	BSMJ0.25-5-3YN	5		255	6.67	167*57*125	圖8
  2		BSMJ0.25-7.5-3YN	7.5		382	10.00	167*57*180
  3		BSMJ0.25-10-3YN	10		510	13.33	167*57*210
  4		BSMJ0.25-15-3YN	15	50Hz	764	20.00	180*70*220	圖9
  5		BSMJ0.25-20-3YN	20		1019	26.67	180*70*270
  6		BSMJ0.25-25-3YN	25		1274	33.33	180*70*270
  7		BSMJ0.25-30-3YN	30		1529	40.00	180*95*270	圖10

  注：如需特殊規格型號產品根據用戶要求供貨 

   

  

ASMJ0.4-30-3自愈式電容器、ASMJ0.4-40-3自愈式電容器